Seho’s Flowstar series is a solid machine for the lower and medium performance class. The full convection reflow soldering machine complements the series. The heating-zone lengths of. 1300, 1700 and 2300mm are suited for small and medium sized quantities. The machine is designed to solder under normal atmosphere at average speeds of 0,3 to 0,7 m/min. The base frame is of solid steel and requires only minimal space. Whereas standard models are equipped with mesh conveyors, the models 4036/1.7 and 4036/2.3 can be ordered with pinand-chain conveyor and center support, or with combi-conveyor. At users’ disposal are conveyor widths up to maximum 360mm. The reflow machine can have three, four or five upper heating zones. Together with convection, they ensure soldering results which meet high quality demands. Using special channels and horizontal jets positioned overall the conveyor width, an optimized gas-flow heats carefully within a small tolerance. Axial blowers circulate the gas across the heating elements into the process chamber. In the peakzone there is an upper convection zone, and optionally a long-wave lower IR heating zone. Models 4036/2.3 feature flux condensate traps at both the start and the end of the process chamber.
Fax +49- 9342-889-200